500kW DG-LC12/3 power module + filter

500kW DG-LC12/3 power module + filter


 

Reliable grid connection of DC sources

FULL 4-QUADRANT OPERATION


Li-ion

Lead-acid

Flow battery

Fuel cell


Wide DC voltage range

EPC's 'DG' type liquid-cooled modules accept a wide range DC input from a battery or other DC source, and produce clean AC power to power nearly any load, building, or remote facility.

All the power and the intelligence resides within a single module. All thats missing is your application.

 

Designed for OEMs and System Integrators

The DG module is designed to enable you to deploy high-performance energy storage or other grid-connected systems.  Integrating generation, battery energy storage, and other sources has never been easier.

With automatic grid synchronization, the LC line of modules only require commands from your system controller.  They are designed from the ground-up to be both reliable as well as easily integrated into your larger system.  

 

Robust

Designed with reliability and robustness in mind, the LC module is a study in simplicity; it has no moving components - even the fan has been eliminated.

With available power ratings up to 500kW per module, DG modules pack the ability and the size to take your system to the next level.

 

Creating a robust system has never been easier.

Module SPECIFICATIONS

 Liquid cooled

  • Water/glycol (EWG)
  • 12-18 liters per minute

Communications

  • CAN
  • Modbus / RS485

500 VAC version

  • 3ph, 3-wire: up to 480 VRMS
  • AC current max: 700 ARMS
  • DC current max: 1,250 ADC
  • Maximum DC voltage: 850 VDC
  • Minimum DC voltage: must be above rectified line voltage

700 VAC version

  • 1ph: up to 690 VRMS
  • 3ph, 3-wire: up to 690 VRMS
  • AC current max: 500 ARMS
  • DC current max: 1,000 ADC
  • Maximum DC voltage: 1250 VDC
  • Minimum DC voltage: must be above rectified line voltage

Size:

  • 511mm x 168mm x 445mm  [20.1” x 6.6” x 17.5”]

 


 

Documentation

Mechanical outline

Communicating to the module

 

Downloads

Mechanical integration drawing

Latest Software       (password provided by EPC representative)